Simply start the software wizard along with setting your target white point and gamma settings.
Suggested Settings:
Target White Point: D65 (6500k)
Gamma Settings: 2.2
Luminance Level: 120
Please be aware of the following:
During the calibration process the software may ask you to lower or raise your brightness levels manually. Once you have adjusted the display within the acceptable range let the system continue the calibration. You may find your screen seems dim based on the level range it has requested, this is however correct and not an error. Also do not adjust your screen brightness level at any point after this process as the entire calibration is based on the brightness that has been set.